INTEL l Solid-State Drive D3-S4510 Series - SSD - encrypted - 240 GB - internal - M.2 2280 - SATA 6Gb/s - 256-bit AES
You have to log in to shop/see prices.
|
|
INTEL l Solid-State Drive D3-S4510 Series - SSD - encrypted - 240 GB - internal - M.2 2280 - SATA 6Gb/s - 256-bit AES
-
Read Speed
555MB/s
-
Write Speed
275MB/s
-
Interface
Serial ATA III
-
Form Factor
M.2
-
SSD Capacity
240GB
|
Description
Specifications
D3-S4510 Series (240GB, M.2 80mm SATA 6Gb/s, 3D2, TLC)
SSDSCKKB240G801
Standard-endurance SATA drives available in capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs).
Specifications:
General
- Capacity 240 GB
- Form Factor M.2 22 x 80mm
- Interface SATA 3.0 6Gb/s
- Weight -
- Lithography Type 64-Layer TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 555 MB/s
- Sequential Bandwidth - 100% Write (up to) 275 MB/s
- Random Read (100% Span) 87000 IOPS (4K Blocks)
- Random Write (100% Span) 16000 IOPS (4K Blocks)
- Power - Active 2.2W
- Power - Idle 0.8W
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) 0.9 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS
- Vibration - Non-Operating 3.13 GRMS
- Shock (Operating and Non-Operating) 1000 G/0.5 msec
- Operating Temperature Range 0°C to 70°C
| SSD form factor | M.2 |
| SSD capacity | 240 GB |
| Interface | Serial ATA III |
| Memory type | TLC 3D NAND |
| NVMe | No |
| Component for | Server/workstation |
| Hardware encryption | Yes |
| Security algorithms | 256-bit AES |
| Read speed | 555 MB/s |
| Write speed | 275 MB/s |
| Random read (100% span) | 87000 IOPS |
| Random write (100% span) | 16000 IOPS |
| Random read | 87000 IOPS |
| Random write | 16000 IOPS |
| Read latency | 34 µs |
| Write latency | 36 µs |
| End-to-End Data Protection | Yes |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD temperature monitoring | Yes |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^17 bits read |
| Mean time between failures (MTBF) | 2000000 h |
| SSD ARK ID | 134922 |
| Harmonized System (HS) code | 84717070 |
| Export Control Classification Number (ECCN) | 5A992C |
| Commodity Classification Automated Tracking System (CCATS) | G162706 |
| Temperature monitoring and logging | Yes |
| Power consumption (read) | 2.2 W |
| Power consumption (write) | 2.2 W |
| Power consumption (idle) | 0.8 W |
| Intel High Endurance Technology (HET) | No |
| Intel® Rapid Start Technology | No |
| Intel® Remote Secure Erase | No |
| Intel® Smart Response Technology | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Maximum operating temperature | 70 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 3.13 G |
| Operating shock | 1000 G |
| Non-operating shock | 1000 G |
| Operating / non-operating shock | 1000 G/0.5 msec |
| Width | 22 mm |
| Height | 80 mm |
| Endurance rating | 0.85 PB |
| Processor family | Intel SSD D3 |
| Power consumption (active) | 2.2 W |
| Launch date | Q1'19 |
| SSD endurance rating | 0.9 PBW |
| SSD power consumption (idle) | 0.8W |
| SSD shock | 1000 G/0.5 msec |
| Sequential reading | 555 MB/s |
| Sequential writing speed | 275 MB/s |
| Status | Launched |
| Product series | Intel® SSD D3-S4510 Series |
| Product codename | Youngsville Refresh |
Please note that the product image is for illustration purposes only and the actual product may differ in appearance from the product image (e.g. computers might not include a display, even if there is one in the product image). If you have any questions, please contact us before making an order.
Technical information is provided by a third party. We do not guarantee or assume responsibility for the accuracy or reliability of the information.