NEW! APC Smart-UPS SC 450VA 230V - 1U Rackmount/Tower
APC Smart-UPS SC, 450VA/280W, Input 230V/Output 230V, Interface Port DB-9 RS-232, Rack Height 1 U
Includes: CD with software, Rack Mounting Brackets, Smart UPS signalling RS-232 cable, User Manual
Product Overview
Front-access servicing
Multiple mounting methods
Rack/Tower convertible
Manageability
| Network manageable
| Monitor and control the UPS remotely via included PowerChute software.
|
| Audible alarms
| Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
|
| Automatic self-test
| Periodic battery self-test ensures early detection of a battery that needs to be replaced.
|
| Predictive failure notification
| Provides early-warning fault analysis on batteries enabling timely preventive maintenance
|
| Serial Connectivity
| Provides management of the UPS via a serial port.
|
| LED status indicators
| Enables quick understanding and response to visual indicators showing UPS status.
|
| InfraStruXure Manager compatible
| Enables centralized management via APC's InfraStruXure Manager. |
Economy
| Boost and Trim Automatic Voltage Regulation (AVR)
| Gives higher application availability by correcting low and high voltage conditions without using the battery.
|
| User-replaceable batteries
| Battery replacement is simple and safe, and can be performed by the end-user. A technician is not required to replace the PowerShield battery
|
| Adjustable voltage-transfer points
| Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
|
| Safety-agency approved
| Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals. |
Availability
| Dataline Surge Protection
| Provides protection of connected equipment from power surges on the data lines.
|
| Power conditioning
| Protects connected loads from surges, spikes, lightning, and other power disturbances.
|
| Intelligent battery management
| Maximizes battery performance, life, and reliability through intelligent, precision charging.
|
| Automatic restart of loads after UPS shutdown
| Automatically starts up the connected equipment upon the return of utility power.
|
| Cold-start capable
| Provides temporary battery power when the utility power is out.
|
| Hot-swappable batteries
| Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
|
| Resettable circuit breakers
| Enables quick recovery from UPS overload events. |
Technical Specifications
| Output Power Capacity
| 280 Watts / 450 VA
|
| Max Configurable Power
| 280 Watts / 450 VA
|
| Nominal Output Voltage
| 230V
|
| Output Voltage Distortion
| Less than 5% at full load
|
| Output Frequency (sync to mains)
| 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
|
| Crest Factor
| up to 5 : 1
|
| Waveform Type
| Stepped approximation to a sinewave
|
| Output Connections
|
| (4) IEC 320 C13 |
|
| (2) IEC Jumpers |
| |
| Nominal Input Voltage
| 230V
|
| Input Frequency
| 50/60 Hz +/- 3 Hz (auto sensing)
|
| Input Connections
|
|
| Input voltage range for main operations
| 160 - 286V
|
| Input voltage adjustable range for mains operation
| 151 - 302V |
| Battery Type
| Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
|
| Typical recharge time
| 5 hour(s)
|
| Replacement battery cartridge
|
RBC18
|
| RBC™ Quantity
| 1
|
Typical Backup Time
at Half Load
| 19.4 minutes (140 Watts)
|
Typical Backup Time
at Full Load
| 5.9 minutes (280 Watts)
|
| Runtime Chart
|
Smart-UPS SC |
Communications & Management
| Interface Port(s)
| DB-9 RS-232
|
| Control panel
| LED status display with On Line : On Battery : Replace Battery and Overload indicators
|
| Audible Alarm
| Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
|
| Emergency Power Off (EPO)
| Optional |
Surge Protection and Filtering
| Surge energy rating
| 320 Joules
|
| Filtering
| Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
|
| Dataline protection
| RJ-11 2-Way Modem/Fax/DSL splitter with protection (four wire dual lines),RJ45 10/100 Base-T Ethernet protection |
| Maximum Height
| 44.00 mm
|
| Maximum Width
| 432.00 mm
|
| Maximum depth
| 383.00 mm
|
| Rack Height
| 1U
|
| Net Weight
| 10.18 KG
|
| Shipping Weight
| 11.73 KG
|
| Shipping Height
| 164.00 mm
|
| Shipping Width
| 476.00 mm
|
| Shipping Depth
| 589.00 mm
|
| Color
| Grey
|
| Units per Pallet
| 24.00 |
| Operating Environment
| 0 - 40 °C
|
| Operating Relative Humidity
| 0 - 95%
|
| Operating Elevation
| 0-3000 meters
|
| Storage Temperature
| -15 - 45 °C
|
| Storage Relative Humidity
| 0 - 95%
|
| Storage Elevation
| 0-15000 meters
|
| Audible noise at 1 meter from surface of unit
| 38 dBA
|
| Online Thermal Dissipation
| 38 BTU/hr |
| Regulatory Approvals
| C-tick,CE,GOST,VDE
|
| Standard Warranty
| 2 years repair or replace |
*The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.