Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
Hewlett Packard Enterprise 3100-48 v2 Switch
Tuotekoodi:
JG315A
-
HP 3100 EI series switches are Layer 2 Ethernet switches designed for enterprise networks demanding high security and intelligence. They provide 10/100 Mbps downlink and 1000 Mbps uplink Ethernet ports, and serve as access devices for 100 Mbps-to-desktop applications in enterprise networks. In metropolitan area networks or various industry networks, they connect end users or aggregate client devices with 10/100 Mbps connections, converging at a higher-capacity switch with 1000 Mbps interfaces. Features include advanced Quality of Service (QoS), rate limiting, QinQ (virtual LAN [VLAN]/VPN), SSHv2, Multicast VLAN Registration (MVR), Virtual Cable Tester (VCT), HGMP V2, GARP VLAN Registration Protocol (GVRP), access control list (ACL), media access control (MAC)-IP-port binding, Endpoint Admission Defense, voice and protocol-based VLAN, Internet Group Management Protocol snooping, and Power over Ethernet (PoE).
Quality of Service (QoS)
• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
• Friendly port names: allow assignment of descriptive names to ports
Connectivity
• IPv6 (on v2 products): Telnet v6: to allow IPv6 management. DNSv6 Client: for IPv6 host management. SNMPv6: for IPv6 switch management. DHCPv6 Client: for automatic IPv6 address configuration of a switch.
Performance
• Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps provide high levels of security and ease of administration without impacting network performance
Resiliency and high availability
• Separate data and control paths: increase security and performance
Layer 2 switching
• PVST+ on v2 products: provides greater interoperability
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet
|
Heat dissipation 140 BTU/hr |
Routing/switching capacity 17.6 Gbps |
Stacking capabilities Virtual; 16 switches |
Management features IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager |
Latency 100 Mb Latency: < 6 µs; 1000 Mb Latency: < 5 µs |
Throughput up to 13.1 Mpps |
Ports (48) RJ-45 autosensing 10/100 ports; (2) SFP dual-personality 10/100/1000 ports; (4) SFP fixed Gigabit Ethernet SFP ports |
|
Operating humidity range 10 to 90% (noncondensing) |
Storage humidity 5 to 95% (noncondensing) |
Operating temperature range 0 to 45°C |
|
Image legal disclaimer Product image may differ from actual product |
|
Minimum dimensions (W x D x H) 43.99 x 26.01 x 4.37 cm |
|
Weight 3.5 kg |
|
What's in the box (1) HP 3100-48 V2 Switch |
|
Warranty Limited Lifetime warranty: Advance hardware replacement with next-business-day delivery (available in most countries). See www.hp.com/networking/warrantysummary for duration details.; Electronic and telephone support: limited electronic and telephone support is available from HP- for details on the duration of support provided with your product purchase; refer to www.hp.com/networking/warrantysummary.; Software releases: for details on the software releases available with your product purchase; refer to www.hp.com/networking/warrantysummary. |
|
Memory and processor Storage: 256 MB SDRAM, 128 MB flash; packet buffer size: 4 MB |
|
Power consumption 41 W (maximum) |
Input voltage 100 - 240 VAC, rated (depending on power supply chosen) |
Huomioi, että kuva on suuntaa antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Olethan yhteydessä ennen tilausta, mikäli jokin jää epäselväksi.
Tekniset tiedot tarjoaa kolmas osapuoli. Emme vastaa tietojen oikeellisuudesta.