You have to log in to shop/see prices.
APC C Switched Rack PDU Zero U - Power distribution strip (rack-mountable) - AC 200/ 208/ 230 V - Ethernet 10/100 - input: IEC 60320 C14 - output connectors: 16 (power IEC 60320 C13) - 3.05 m cord - black - (AP7950B)
APC C Switched Rack PDU Zero U - Power distribution strip (rack-mountable) - AC 200/ 208/ 230 V - Ethernet 10/100 - input: IEC 60320 C14 - output connectors: 16 (power IEC 60320 C13) - 3.05 m cord - black - (AP7950B)

APC C Switched Rack PDU Zero U - Power distribution strip (rack-mountable) - AC 200/208/230 V - Ethernet 10/100 - input: IEC 60320 C14 - output connectors: 16 (power IEC 60320 C13) - 3.05 m cord - black -

SKU: AP7950B
TYPE:
PDU

Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Remote Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.


Load indicator LED

Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Power Delays

Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Local Current Monitoring Display

The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Remote Individual Outlet Control

Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Alarm Thresholds

Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

Network Management Capabilities

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Integrates with StruxureWare Data Center Expert

An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Flash Upgradeable

Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Design
PDU types
Metered, Switched
Rack capacity
0U
Mounting
Vertical
Product colour
Black
Ports & interfaces
AC outlets quantity
13 AC outlet(s)
Power plug
C14 coupler
Output connections
Sixteen IEC 320 C13 outlets
Features
LED indicators
Yes
Cable length
3.05 m
Management features
Monitoring
Current, Power, Voltage
Outlet control
Lock-out, Recycle, Turn off, Turn on
Power
Nominal input voltage
200-230 V
AC input frequency
47/63 Hz
Maximum current
10 A
Nominal output voltage
230 V
Load capacity
2300 VA
Maximum input current per phase
10 A
Maximum total current draw per phase
10 A
Maximum power
2300 W
Certificates
Compliance certificates
RoHS
Certification
VDE, CE, EAC, EN55022, EN55024, AS/NZS CISPR 22
Operational conditions
Operating temperature (T-T)
-5 - 45 °C
Storage temperature (T-T)
-25 - 65 °C
Operating relative humidity (H-H)
5 - 95%
Storage relative humidity (H-H)
5 - 95%
Operating altitude
0 - 4500 m
Non-operating altitude
0 - 15000 m
Operating temperature (T-T)
23 - 113 °F
Weight & dimensions
Width
55.6 mm
Depth
43.9 mm
Height
1244.6 mm
Weight
4.3 kg
Packaging data
Package weight
5.2 kg
Package width
152.4 mm
Package depth
127 mm
Package height
2133.6 mm
ACCESSORIES AND PERIPHERALS / UPS
ACCESSORIES AND PERIPHERALS / COMPUTER ACC.
COMMUNICATION / KVM/DATASWITCH
COMMUNICATION / NETWORK ACC.
COMMUNICATION / CABLES
Please note that the product image is for illustration purposes only and the actual product may differ in appearance from the product image (e.g. computers might not include a display, even if there is one in the product image). If you have any questions, please contact us before making an order.

Technical information is provided by a third party. We do not guarantee or assume responsibility for the accuracy or reliability of the information.